Fiber Checker-Visual fault locator FC2010

Optical Fiber Checker
Visual Fault Locator
Optical Fiber checker is made with laser technology. The universal connector is installed with a fine ceramic sleeve for good alignment and to minimize scratches on the ferrule of the optical fiber cable. It has a button on the barrel for CW/PULSE/OFF functions. The users can tell the fault of the optical fiber cable easily with 650nm wavelength laser beam.

Features
• Easy to check fiber fault section with red laser
• Function switch supplies both CW and pulse mode for extra clear
 noticeable results
• Portable pen style design
• Strong protective cap for falling protection
• Low operation current
• Standard 2xAAA battery apply
 Specifications
• Laser class: Class 3R
• Wave length: 635nm@25ºC
• Spectral width: <20nm
• Output power: >–4dBm (0.398mw) @25ºC into 9um fiber
• Mode: CW/3Hz Pulse
• Connector Style: Universal (Accept any connector with a 2.5mm ferrule)
• Battery type: AAA 1.5V x 2
• Spectral width: < 20nm
• Range: Visibility to 3km
• Operating temp: 0ºC to 50ºC
• Storage temp: 0ºC to 70ºC
• Dimension: Length: 146mm, Diameter: 13.5mm